manualshive.com logo in svg

LeCroy USB Protocol Suite Advisor T3, User Manual

Share
Download
LeCroy USB Protocol Suite Advisor T3 User Manual Download Page 124

Chapter 5: Reading a Trace

USB Protocol Suite User Manual

110

LeCroy Corporation

5.30 View Decoded Transactions

After you set Display Options, the Trace View screen is re-drawn to display decoded 
transactions in the colors and format you selected.

When you instruct the Analyzer to display USB transactions, the components of each 
transaction are collected from the current recording and are grouped and indented below 
each decoded transaction. Each row shows a transaction with a unique numeration, a 
label, and color-coded decoding of important data.

Note

: If CRC errors are found in a DATAx (2.0) packet or a DP (3.0) packet, the data in 

that packet will not be promoted to the Transaction, Transfer/, and so on, levels above, 
since it is assumed that the data will be re-sent. The data count will show as 0 Bytes.

Summary of Contents for USB Protocol Suite Advisor T3





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands