Sierra M6
‐
2 SAS/SATA Protocol Analyzer User Manual
57
Projects
LeCroy Corporation
Choose a Parameter
To choose a parameter for capture from any of these categories, highlight the category in
the parameter window and click the
Add>>
button. This opens selection dialogs for each
of the categories displaying all of the parameters for that category. All patterns added
appear in the Project Tree.
Exclude Patterns
Check this box to allow for the capture of everything except the patterns that have been
added to the Project Tree.
When you check this box, the Primitive category appears in the Parameter window, and
the window enables the Exclude Idle checkbox.
Figure 2.17: SAS: Exclude Patterns Checked
SAS
vs.
SATA:
SATA Dialog replaces “Exclude SATA_CONT” with “Exclude CONT” and
“Exclude SATA_SYNC” with “Exclude SYNC”. SATA Dialog has different Pattern Parameters
(see
“Patterns and Data Capture Setup” on page 56
To remove an item from capture, highlight it in the Project tree and click the
<<Remove
button.
