LeCroy Sierra M6-2, User Manual

Page: 51 / 480

Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual 49
Exporting LeCroy Corporation
Export to Generator
From the File menu, you can Export to Generator, using the Export to Generator dialog.
Figure 2.9: Export to Generator Dialog
You can limit the range of the saved file. You can save:

All Samples

Range between selected cursors

Range between ATA Commands or Transport
You can import SSP Frames, SMP Frames, or STP Frames (see “Events and Event
Properties” on page 443 ).
You can Insert Waits (see “Wait Commands” on page 419 ).
You can use Auto Alignment (see “The Global Setting “AutoAlign”” on page 390 ).
You can select the Port (see “Setup Menu” on page 379 ).
In the Project Name , enter a valid generator file.
Note:
The resulting Trainer Generation file cannot exceed 2 MB or 1,000,000 packets.
Export Read/Write Command Report
From the File menu, you can Export Read/Write Command Report as an Excel file, using
the Save As dialog.
x.ssg