LeCroy Corporation
Statistical Report
270
Sierra M6
‐
2 SAS/SATA Protocol Analyzer User Manual
Statistical Report
Whenever a captured sample is in the Sample Viewer, a
Statistical
Report
selection in the
Report
menu and a
Statistical
Report
Button
on the viewer toolbar are enabled. You can
create a Statistical Report for the entire capture or select a portion of it.
To display a Statistical Report, click the
Statistical
Report
button on the viewer
toolbar or select
Report
>
Statistical
Report
to display the Select Statistical Report Range
dialog.
Figure 3.96: Statistical Report Range Dialog
The default statistical report has All Samples. You can set a specific Statistical report range
between defined cursor positions or events.
Report between Cursors
Click the option button next to the
From
cursor selection drop down list. Then click the
From
down arrow and choose the 1st cursor, click the
To
down arrow to choose the 2nd
cursor, and click
OK.
The resulting report has only the capture between the cursors.
Figure 3.97: Report between Cursors
Report between Events
Click the option button next to the
From
the event selection dropdown list, click the
From
down arrow to choose the 1st event, then enter the number of its occurrence. Next
click the
To
down arrow to choose the 2nd event, then enter the number of its
occurrence.
Figure 3.98: SATA: Report between Events
Click
OK.
The resulting report are limited to the capture between the defined events.
SAS vs. SATA: SAS adds Transport, SCSI Cmd, SMP Cmd, and Task Mng to the drop
‐
down
list and deletes FIS and Phy Reset.