LeCroy Advisor, User Manual

Page: 91 / 174

USB Advisor User Manual Chapter 8: Display Options
LeCroy Corporation
83
8.4 Saving Display Options
You can save a set of Display Options values, make a set the default settings, or use a
saved set of values with the commands at the bottom of the
Display Options window:
• To save the current Display Options values in an options file for use in future
sessions, click
Save . Enter a file name without a file name extension. The
program adds the .opt extension. (The file must have an .opt file name
extension.)
• To load a previously saved .opt file, click Load and select a file name.
• To save the current Display Options values in the default.opt options file for
use as the default display options, click Save as Default . (Do not delete the
default.opt file.)
• To apply the current Display Options values, click Apply . The Display Options
window remains open.
• To apply the current Display Options values and close the Display Options
window, click
OK .
• To cancel unsaved changes to display values and exit the Display Options
window, click
Cancel .