LeCroy Advisor User Manual Download Page 148

Page: 148 / 174

Chapter 12: Updates

USB

Advisor

User Manual

140

LeCroy Corporation

12.2 Software Updates

When a new software release is available, it is posted on the Support page of the LeCroy
website at

www.lecroy.com/support.html

To update the software:

Step 1

In the

About Advisor

screen, verify which version of LeCroy USB Advisor™

Software you are currently running.

Step 2

Find the latest released software version on the LeCroy website under

Support

If you are running the latest version of the software, no further action is needed.

If you are

not

running the latest version, continue to Step 3.

Step 3

Download the Zip files from the website.

Step 4

Unzip the files into your choice of directory.

Step 5

Click

Start

, then

Run

, and browse to where you unzipped the files.

Step 6

Select the program named

Setup

and click

Open

Step 7

Click

to run the Setup and begin the installation.

Step 8

Follow the on-screen instructions to complete the installation.

Step 9

Read the Readme.txt file for important information on changes in the release.

Summary of Contents for Advisor















































































































































































Search results

Summary of Contents for Advisor

Reviews:

Related manuals for Advisor

Brands by name

Popular brands

LeCroy Advisor, User Manual

Search results

Summary of Contents for Advisor

Reviews:

Related manuals for Advisor

Brands by name

Popular brands