LeCroy Advisor, User Manual

Page: 145 / 174

USB Advisor User Manual Chapter 11: Recording Options
LeCroy Corporation
137
11.10 Merging Trace Files
It is possible to merge a Classic-Speed trace file with a Hi-Speed trace file using the
Merge Trace File command under the File menu. This option only works with files that
were created simultaneously through a single recording session. If the files were
recorded during separate recording sessions, Advisor generates an error message and
prevents the merge from completing.
Note: Advisor is capable of merging High Speed and Classic Speeds traffic into a
single merged file if the
Auto-Merge 2 Channel Trace Files option is
checked in the Recording Options dialog box. See page 117 for details.
To merge two trace files:
Step 1 Select File > Merge Trace Files to open a dialog box asking for the first source
file.
Note: The Merge Trace Files command can be run with or without a trace file open
on the screen. The merge process ignores the open file.
Step 2 Select the first trace file to be merged, then click Save .
Note: It does not matter which of the two trace files is first selected, as long as both
were recorded in the same session.