LeCroy Advisor, User Manual

Page: 141 / 174

USB Advisor User Manual Chapter 11: Recording Options
LeCroy Corporation
133
11.7 Other Actions: External Output Signals
Most Event buttons can be configured to trigger external output signals.
If a blue dot is present in the Event button, it means that a menu is present with three
options for configuring external output signalling:
• Enable External General Purpose Output
• Enable External General Purpose Output only
• External Output Form
If you choose to enable External Output signalling, a small blue arrow projects from
the Event button. This arrow is a reminder that External Signals have been set.
To enable or disable external trigger output:
Step 1 Click the blue dot on an Event button.
A menu similar to the one below opens. The menu may say Disable instead of
Enable.
Step 2 Select Enable External Trigger Output or Disable External Trigger Output .
If you select Enable External Trigger Output , a small arrow appears on the
right side of the button to indicate that a condition has been set for creating an
external output signal.
Choosing Disable External Trigger causes the arrow to disappear.