LeCroy Advisor, User Manual

Page: 137 / 174

USB Advisor User Manual Chapter 11: Recording Options
LeCroy Corporation
129
11.5 Connecting Counters to Events
The center section of the Actions window displays two Counter buttons marked Count1
and Count2 .
Counters provide a way of triggering after a number of events have passed, such as
"Trigger after the 20th IN packet."
Counters have blue dots in their top left corner that provide access to pop-up menus. The
menus provide the means of setting the counter value. The counter can be set between
1 and 65,535.
To connect an event to a counter:
Step 1 Open the Event window and select an Event.
Selecting an Event causes an Event button to automatically appear in the
Actions window.
Step 2 Open the Actions window.
The window displays an Event button that is connected to the Trigger button on
the right via a line.
Step 3 Click the Event button.
An arrow appears that connects the Event button to your mouse pointer.
Step 4 Click one of the two counters.
The Event automatically connects to the Counter button and then connects to the
Trigger button.