
Li mit e d Wa rr an ty & D is cl ai me r
Leak Intelligence, LLC will repair or replace, at its option, any part of the device, which
proves to be defective in workmanship or material under normal use, in the USA except in
the states of Alaska or Hawaii, for up to ten years from the date of purchase. This warranty
does not include issues caused by the buildup of calcium or other chemicals in the valve or
damage caused by chemicals in the water supply. Leak Intelligence, LLC will repair and
provide all labor and parts necessary to correct such defects, free of charge, provided the
device has been operated in accordance with the manufacturer's guidelines. The Customer
must return the device to Leak Intelligence, LLC for testing and repair or replacement.
Should you need service, during warranty period or beyond, call 855-828-2811 to obtain
return authorization before shipping your device to Leak Intelligence, LLC.
Except for the obligation to repair or replace the Leak Gopher as stated herein, Leak
Intelligence, LLC shall not be liable for any incidental or consequential damage caused by
failure of the Leak Gopher to function as advertised or expected.
All warranty service will be provided by Leak Intelligence, LLC technicians and this
warranty is void if the device has been opened or serviced by anyone other than a Leak
Intelligence, LLC technician.
EXCEPT FOR THE LIMITED WARRANTY AS STATED IN THIS AGREEMENT, THERE ARE NO
WARRANTIES, EXPRESSED OR IMPLIED, BY OPERATION OF LAW OR OTHERWISE. LEAK
INTELLIGENCE, LLC DISCLAIMS THE IMPLIED WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE AS TO PRODUCTS AND SERVICES SUPPLIED
UNDER THIS AGREEMENT. IN NO EVENT WILL LEAK INTELLIGENCE, LLC BE LIABLE FOR
ANY INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT
NOT LIMITED TO, COMMERCIAL LOSS, PROPERTY DAMAGE, LOSS OF USE, LOSS OF
REVENUES, PROFITS, OR SAVINGS, EVEN IF LEAK INTELLIGENCE, LLC KNEW OR SHOULD
HAVE KNOWN OF THE POSSIBILITY OF SUCH DAMAGES.
Leak Intelligence, LLC does not guarantee the leak notification service in regard to
notification of leaks. Leak Intelligence, LLC is not responsible for any value of water loss,
commercial loss or any property damage, or for any other loss or damage caused or
incurred as a result of the failure of the device and/or failure of the notification service.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights, which vary from state to
state. To know what your legal rights are in your state, consult your local or state
consumer affairs office or your state's Attorney General.
Leak Gopher Seri es 2000 Water Heat er
Leak Detector – Val ve C ontr oll er
LG LDVC 3. 6V DC
Qui ck Sta rt Gui de
The Leak Gopher Leak Detector - Valve Controller is an all in one device to protect your
home or business from water leaks. The Leak Gopher Leak Detector – Valve Controller is
designed to sense the presence of water, sound an audible alarm and turn the water off
automatically.
You can also operate the valve directly using on and off buttons located on the front of the
Leak Gopher Leak Detector – Valve Controller.
The Leak Gopher Leak Detector - Valve Controller is designed for those applications where
the area or appliance you want to monitor for water leaks (i.e. water heater) and the water
line where you want to install the electronic water valve are located in the same location.
You can locate the electronic water valve anywhere and connect it to the Leak Gopher
using six conductor telephone wires and connectors.
The Leak Gopher Leak Detector - Valve Controller can be powered using the 3.6 VDC wall
cube adapter (included) or a 9 VDC battery (included). If the battery is installed and the
wall cube is attached to the device and plugged into a standard 110VAC power outlet, the
battery will serve as backup power in the case of a power outage.
To install the 9VDC battery, remove the four screws securing the lid to the base and
carefully remove the top. There is a ribbon cable that attaches the lid to the base so care
should be taken not to damage the ribbon cable. Attach the 9VDC battery to the battery
connector located in the battery compartment and reattach the lid to the base.
If the battery is not installed and the device is powered by the wall cube, the Leak Gopher
will sound a low battery chirp. It will also sound this chirp when the battery is low and needs
to be replaced.
*** CAUTION ***
Do NOT insert fingers into the valve as this may cause serious injury!
How to install the Leak Gopher Leak Detector – Valve Controller
1.
Determine where you want to mount the Leak Gopher Leak Detector - Valve
Controller and secure it to the wall using the mounting holes located in the top
and bottom of the device.
2.
Determine the area where you want to place the Leak Gopher water sensor. A
low profile water sensor is available if you need to place the sensor under
appliances, etc. Visit
www.leakintel.com
for more information.
3.
Plug the Duplex Adapter (included) into the RJ-11 connector on the bottom of the
Leak Gopher.
4.
The water sensor has a 2-meter telephone wire attached.
5.
If the 2-meter telephone wire from the water sensor will reach, plug it into the
Duplex Adapter on the bottom of the Leak Gopher.
6.
You can use standard telephone wires (4 wire) and connectors to extend the
water sensor wire to the leak Gopher. The water sensor uses the center two
wires, usually red and green, just in case you want to attach the telephone wires
to a biscuit connector, etc)
7.
You can use standard telephone duplex adapters (splitters) to install multiple
water sensors to the Leak Gopher.