WinFast
®
6000ABX User’s Manual
49
Appendix C BIOS Flash Utility
If you get a new Floppy Diskette or CD_ROM from your local dealer
that contains a new version of the BIOS binary file or you obtain
the new BIOS binary file directly from our Web Site
(
Please follow the steps described below to update the BIOS.
Step 1
Reboot into DOS environment or "Command Prompt Only" of
Windows95/98
Step 2
Insert the accompany CD into CD-ROM (or floppy disk to Drive
A)
Step 3
Copy "
AWDFLASH.EXE
" to a new directory from X:\FLASH
sub-directory. (X: means CD-ROM drive letter)
Step 4
Copy the new BIOS binary file to the above said new directory
Step 5
Change to the new directory and type the following command:
AWDFLASH [Filename] /CC
([Filename] means the file
name of BIOS Binary file, /CC : Clear CMOS data)
A message will be displayed on your screen and just follows the
instruction to finish the BIOS updating.
You can also use "AWDFLASH /?" command to get help messages.
Warning: It is recommended that the application to be run under
DOS prompt. In Windows 95/98, please do following: Start your
system when "Starting Windows 95 (or 98)...." message appear,
press F8 immediately to enter the "Startup Menu" and then select the
"Command Prompt Only" option.
