Safety
Screw
D4. Place the lamp onto the pole.
Match the hole on the lamp with the hole on the pole,
and insert the screw in.
Fasten the screw and secure the lamp on the pole (as
shown in the picture on the left).
D5. Fix the pole.
Pull the extendable pole out and then fasten the tightener
from top to bottom (as shown in the picture on the left).
D6. To prevent any accident caused by a loose tightener,
please lock a ST3
×
4mm safety screw under the
bottom section of the pole. ( As shown by left diagram)
E. Angle Adjustment illustration:
E1. Solar panel angle adjustment: loosen two M6 screws on both sides of main body, and adjust it to
suitable position and lock screws.
E2. LED module angle adjustment: turn the LED module to suitable position with your finger. (Refer
to the below figure)
11
12
EN
E
2
E
1
Children are forbidden to
play with the lamp post.
CAUTION
Be careful when pulling
extendable pole out as
well as pushing it back
into place.
CAUTION
Caution:
To avoid the damage or personal injury, you must hold the lamp body against
suddenly droping down when you loosen the screws to adjust the angle of
solar panel.