leadsun AE3C User Manual Download Page 8

Software operation instruction

14

13

With LEADSUN EDGE, you can do the following operation:

1. Register to become a member

2. lighting control

3. History data query

4. Working mode configuration

5. Real-time view.

For detail instructions, please see the "APP User Guide" under "More Functions" in the 
software.

Please use LEDSUN EDGE APP to remotely control and configure the street light, visit 
www.leadsunglobal.com and follow the steps to Download the LEADSUN EDGE.

A. For APPLE users please go to the APP STORE and install the APP 'LEADSUN 

EDGE' .

B. Android cellphone please visit www.leadsunglobal.com or go to the software 

platforms like Google Play to download and install 'LEADSUN EDGE'.

C. PC App please visit 

http://47.52.88.104:8083/Home/Login

Product Installation

Transportation and Storage

· This product contains lithium batteries. Please follow air transport regulations when shipping. It 

should be regarded as potentially flammable and explosive, and be isolated from other goods 
when stored, so as to avoid any damage.

· The solar panels of this product should be considered as fragile. There should never be more 

than 4 layers of boxes when stacked. To avoid damage to the panels, make sure no heavy 
pressure is applied to the boxes.

· Please store the product in temperature between 0

 to 45

.  

· If stored for a long period, the product should be recharged every 6 months. Please only use the 

special charger (purchased from manufacturer) to avoid damage to the battery or device.

· When repackaging the product after inspection or charging, set the light into sleep mode by 

holding the On/Off button for 5 sec. The light will flash three times, to signal that it has properly 
entered sleep mode. You may now repackage the product into its box. To exit sleep mode, either 
press the On/Off button one more time, or wait an hour for the street light to reboot automatically 
when exposed to sunlight. 

Clean

To clean, apply mild detergent with a damp cloth and gently wipe the surface of the solar panel.

Replacement of Parts / Spare Parts:

Please contact LEADSUN or your local distributor/dealer.

Maintenance and Products Care

Summary of Contents for AE3C









Reviews: