Product Installation
1. Please confirm if the 2G/4G module in the gateway supports the data network covered by the
local carrier before installation.
2. When using the inbuilt 2G/4G module gateway, you need to insert a SIM card which has the
data service. The data service will cause the service fee, and you need to pay the relevant
service fee to the local carrier.
Cautions:
5. Wireless system installation
(Suitable for wireless type)
12
11
LORA Terminal antenna installation
Gateway antenna intallation
Insert SIM Card
Insert the 2G/4G SIM card into the slot according to the picture. Press the button next to it to
restart the gateway and then cover with the waterproof plug.
Connect the antenna to the corresponding positions according to the picture below.
Antenna installation
1
2
Ensure the SIM card cutting edge is face down and the
magnetic stripe is away from the indicator light.
Cautions:
2
Connect the LED light with corresponding cables. Mount the LED street light on the pole. (See
Picture 8)
Picture 8
At factory setting, AE3C units turn on at dusk and off at dawn automatically (light photosensitivity is
around 30lx). In the evening, AE3C units operate at dim mode when no one is not around, and
increase light output immediately when motion is detected
, to conserve battery power. It ensures that
the light can work normally through days with limited sunlight.
Dim mode
(30% Brightness)
Full Brightness
(100% brightness)
Working Mode Description
LORA Antenna
Silicone Sleeve
Dust Cover
LORA Antenna