leadsun AE3C User Manual Download Page 4

Check if you have all the components listed below before installation, the components and 
quantity of each set as follows:

Solar E

ngine:

Lighting

LED street light

Bird spike

M8

×

16 Screw 6pcs

Part List

Solar Engine (Take gateway for example)

Daytime: While connect the LED street light to solar engine, it lights 20 seconds and then Off. It 

means the AE3C has been activated automatically. 

At Night : Press the button for 5s , the light is on. Short press the button, the light will be switched 

between ON and OFF.

Tips:

ON mode: the system will work normally, 
charging in the daytime and discharging at 
night.

Transport (idle) mode: the system will power 
off in an hour and goes to the OFF mode, for 
transport packing or maintenance status.

OFF mode: The system will not work,  charge 
or  discharge.

*

Turn ON the light: 

 

a.

 Connect the street light to solar engine in 

daytime, it will be activated automatically 
(lights 20s and then OFF).

b.

 Long press 5s to turn on the light when it 

is OFF.

Turn OFF the light:

Press the button 5s when it is On, the light 
comes into TRANSPORT MODE. Second 
press the button 5s or no operation in one 
hour, the light turns off.

 

OFF

Mode

ON

Mode

Button Switch

Transport 

Mode

Product Activation

6

5

Press 5 seconds 
or no operationfor 
more than an hour 

Long press 
5 seconds

Mounting bracket

M12

×

85 screw 

bolt 1pc

M8×16 

screw

 6pcs

M4×8 

screw

 3pcs

M4 lock washer 3pcs
M4 flat washer 3pcs

Open spanner

User manual

Special 
spanner (Optional)

*

* **

At daytime 
automatically ON or 
press till the light is 
ON. 

LORA Antenna (Gateway Type 2pcs)

Summary of Contents for AE3C









Reviews: