10. VIDEO SIGNAL WAVEFORM DISPLAY
83
10.5.8
Adjusting the Scale Intensity
To set the scale intensity, follow the procedure below.
If you press F•D 2, the intensity will be set to its default value of 4.
Procedure
WFM
→
F•1 INTEN/SCALE
→
F•D 2 SCALE INTEN
Settings
Range:
-8 to 7 (the default value is 4)
10.6
Configuring the Gain and Filter Settings
To configure the gain and filter settings, press F•2 GAIN/FILTER on the video signal
waveform menu.
10.6.1
Selecting the Fixed Magnification
To select the fixed video signal waveform magnification, follow the procedure shown below.
Procedure
WFM
→
F•2 GAIN/FILTER
→
F•2 GAIN MAG
Settings
×1:
Waveforms are displayed at ×1 magnification (this is the default value).
×5:
Waveforms are displayed at ×5 magnification.
10.6.2
Setting the Variable Gain
To set the variable video signal waveform gain, follow the procedure below.
You can set the video signal waveform gain to a value between 0.2 and 10 by setting F•2
GAIN MAG and F•D 1 GAIN VARIABLE. The gain value appears in the upper right of the
screen.
Procedure
WFM
→
F•2 GAIN/FILTER
→
F•1 GAIN VARIABLE
Settings
CAL:
The gain is fixed (this is the default value).
VARIABLE: You can adjust the waveform gain by turning F•D 1. Press F•D 1 to return the
setting to its default value (1.000 or 5.000).
0.200 to 2.000 (when GAIN MAG is set to ×1; the default value is 1.000)
1.000 to 10.000 (when GAIN MAG is set to ×5; the default value is 5.000)
