12. PICTURE DISPLAY
127
12.10 Configuring Closed Caption Display Settings
To configure the closed caption display settings, press F•4 SUPER IMPOSE on the picture
menu. You can configure the settings for the display of English closed caption information.
Closed captions are displayed when you press F•4 SUPER IMPOSE. They are cleared from
the display when you switch to a different menu. Additionally, when the F•4 SUPER IMPOSE
menu is displayed, the displays of markers, line select markers, and AFDs are turned off.
This feature is not supported by dual link mode and the multi-screen display. F•4 SUPER
IMPOSE does not appear on their menus.
12.10.1
Selecting the Format
To select the format of English closed captions, follow the procedure below.
Procedure
PIC
→
F•7 next menu
→
F•4 SUPER IMPOSE
→
F•1 FORMAT
Settings
608(708):
CEA/EIA-608-B closed caption information that is embedded in EIA-708-B
CDP packets is displayed (this is the default value).
608(608):
CEA/EIA-608-B closed caption information is displayed.
VBI:
CEA/EIA-608-B closed caption information that is embedded in vertical
blanking intervals is displayed.
12.10.2
Selecting the Content to Display
To select the content to display of English closed captions, follow the procedure below.
Procedure
PIC
→
F•7 next menu
→
F•4 SUPER IMPOSE
→
F•2 LANGUAGE
Settings
Range:
CC1 to CC4 or TEXT1 to TEXT4 (the default value is CC1).
