10. VIDEO SIGNAL WAVEFORM DISPLAY
89
SWEEP MAG = ACTIVE
SWEEP MAG = BLANK
Figure 10-12 Horizontal magnifications
10.7.5
Selecting the Field to Display
When the input signal is interlace or segmented frame and F•2 V SWEEP is set to 1V, to
select which field is displayed, follow the procedure below.
Procedure
WFM
→
F•3 SWEEP
→
F•4 FIELD
Settings
FIELD1:
Field 1 is displayed (this is the default value).
FIELD2:
Field 2 is displayed.
10.7.6
Displaying the Blanking Interval
To set how the blanking interval is displayed, follow the procedure below.
The blanking interval is normally not shown on the vector display, but on the multi-screen
display, the blanking interval is shown according to the setting that you make here.
The blanking interval display is not supported on the thumbnail display.
Procedure
WFM
→
F•3 SWEEP
→
F•5 BLANKING
Settings
REMOVE: Only the active interval of the input signal is displayed (this is the default value).
H VIEW: The active interval and the horizontal blanking interval of the input signal are
displayed.
This option cannot be selected when COLOR MATRIX is set to COMPOSIT.
V VIEW: The active interval and the vertical blanking interval of the input signal are
displayed.
ALL VIEW: The entire input signal is displayed.
This option cannot be selected when COLOR MATRIX is set to COMPOSIT.
