5. SYSTEM SETTINGS
33
F•2
F•2
5.4
Setting the SDI Format (LV 5838 only)
To set the SDI format, use the SDI FORMAT tab.
→
BEHAVIOR SETUP
→
Figure 5-5 SDI FORMAT tab
●
i/PsF Select: Interlace / Segmented Frame
Select the display format that is shown at the top of the screen.
5.5
Configuring the Dolby Settings (Option; to be supported in the future)
To configure the Dolby settings, use the DOLBY tab.
The DOLBY tab appears when the Dolby option is installed.
→
BEHAVIOR SETUP
→
NEXT TAB
→
Figure 5-6 DOLBY tab
F•3
SYSTEM
SYSTEM
USO
RESTRITO
