7. SYSTEM SETTINGS
79
●
Alarm Select
Select the channel that errors are detected on for transmitting alarms.
A / B / AB
7.2.4
Setting the Date and Time
Use the DATE&TIME tab to set the date and time.
You cannot set the date and time when SNTP Client Select on the ETHERNET SETUP tab is
set to ON. To set the date and time manually, set SNTP Client Select to OFF, and then press
F•1
COMPLETE. Then, press
F•2
SYSTEM SETUP again.
The settings that you specify here will not be initialized even if you initialize the LV 7770. In
addition, they are not registered to presets.
SYS
→ F•2
SYSTEM SETUP → F•2
PREV TAB →
Figure 7-7 DATE&TIME tab
