7. SYSTEM SETTINGS
68
7. SYSTEM SETTINGS
You can use the system menu to configure LV 7770 settings and optional unit settings. To display
the system menu, press SYS.
SYS
→
Figure 7-1 System menu
7.1
I/O Settings
To configure the I/O settings, press
F•1
FORMAT IN OUT on the system menu. FORMAT IN
OUT is a tab menu. For details on how to operate tab menus, see section 4.7.3, “Tab Menu
Operations.”
7.1.1
Configuring SDI Input Settings (LV 5770SER08 and LV 5770SER09A)
Use the SDI FORMAT tab to configure the input SDI signal format.
SYS
→ F•1
FORMAT IN OUT →
Figure 7-2 SDI FORMAT tab
●
Auto/Manual
Select whether the input signal format will be detected automatically.
If you select Auto, the payload ID packet must be correctly embedded in the input signal
for the LV 7770 to detect a 3G or HD dual link signal.
Auto / Manual
