40
5. SYSTEM SETTINGS
F•5
5.5
Setting the Date and Time
To configure the display settings, press
DATE&TIME on the SYSTEM menu.
The settings that you specify here will not be initialized even if you initialize the LV 5333.
→
DATE&TIME →
Figure 5-8 DATE&TIME menu
To set the date and time, follow the procedure below.
The date and time are applied when you press
CLOCK SET. To cancel, press SYSTEM.
Procedure
5.6
Setting the Short Cut Key
To assign a function to the SHORT CUT key, follow the procedure below.
Procedure
SYSTEM → F•6 SHORTCUT KEY SET: LIGHT / CAP USB / DIRECT_K / VOLUME /
CONTRAST
Settings
LIGHT:
All the key LEDs light when you press SHORT CUT. Use this setting in a dark
environment when the keys are difficult to see. The key LEDs turn off when you
perform the next operation.
CAP USB: A screen capture will be taken when you press SHORT CUT and saved to a USB
memory device.
DIRECT_K: A previously registered preset will be loaded when you press SHORT CUT. To
register a preset, press MEMORY and then SHORT CUT. The key LED blinks
twice, and the preset is registered.
VOLUME: When you press SHORT CUT, you can adjust the headphone volume with the
function dial (F•D). The adjustment mode is cleared when you perform the next
operation.
CONTRAST: Pressing the SHORT CUT key switches the picture contrast in this order: 50%,
100%, and 200%.
SYSTEM → F•5 DATE&TIME
→ F•1 YEAR: 2000 - 2200
→ F•2 MONTH: 1 - 12
→ F•3 DAY: 1 - 31
→ F•4 HOUR: 0 - 23
→ F•5 MINUTE: 0 - 59
→ F•6 SECOND: 0 - 59
F•5
F•7
SYSTEM