35
5. SYSTEM SETTINGS
SYSTEM → F•3 DISPLAY → F•1 INFORMATION → F•5 TIMECODE: LTC / VITC / D-VITC
SYSTEM → F•3 DISPLAY → F•2 BACK LIGHT: HIGH / LOW
SYSTEM → F•3 DISPLAY → F•3 AUTO OFF: OFF / 5min / 30min / 60min
5.3.3
Displaying the Time
To select the display format of the time shown at the top of the screen, follow the procedure
below. The time is also displayed on the event log screen and USB memory screen.
Procedure
Settings
REAL:
The time set on the SYSTEM menu is displayed.
TIMECODE: The input signal timecode is displayed.
OFF:
The time at the top of the screen is not displayed. In other areas, the time set
on the SYSTEM menu is displayed.
5.3.4
Displaying the Color System
To turn on or off the color system display (e.g., YCbCr422 10b) at the top of the screen,
follow the procedure below. If
FORMAT is set to FREQ, ON cannot be selected.
Procedure
5.3.5
Displaying the Time Code
When
TIME is set to TIMECODE, to select the time code display format, follow the
procedure below.
Procedure
5.3.6
Setting the Backlight
To select the backlight brightness, follow the procedure below.
Procedure
5.3.7
Selecting the Auto Shutoff Time
To select the length of time that must elapse since the last key operation before the backlight
is automatically turned off, follow the procedure below. If OFF is selected, the backlight will
not turn off automatically.
If the backlight turns off, press any key except the power key to turn it on again.
Procedure
SYSTEM → F•3 DISPLAY → F•1 INFORMATION → F•4 COLOR: ON / OFF
SYSTEM → F•3 DISPLAY → F•1 INFORMATION → F•3 TIME: REAL / TIMECODE / OFF
F•1
F•3
