Leader LT 6280A, Instruction Manual

Page: 16 / 27

5. REMOTE CONTROL
10
5.4 Command Description
No. 1
Command PWS
Description Get the 5 V power supply status
Data Description Format
0 5 V not available DEC Rsp. parameter 1
1 5 V available DEC
No. 2
Command VST
Description Get the video data
Data Description Format
0 (when omitted) Get Rsp. parameters 1 to 4 DEC Tx parameter
(can be omitted) 1
1 Get Rsp. parameters 1 to 13 DEC
1 0, 1 Same as the Tx parameters DEC
2 0 to 1920 Image data width DEC
3 0 to 1470 Image data height DEC
0 Progressive DEC 4
1 Interlace DEC
5 - H Resolution DEC
6 - V Refresh DEC
7 - Vsync Active Line DEC
8 - V Front Porch DEC
9 - H Front Porch DEC
10 - Hsync Active Width DEC
11 - Pixel Clock Timing DEC
12 - Frame Rate DEC
0 3D OFF DEC
1 3D Frame Packing DEC
2 3D Side by Side(Half) DEC
3 3D Side by Side(Full) DEC
Rsp. parameter
13
4 3D Top and Bottom DEC