Leader LT 6280A, Instruction Manual

Page: 14 / 27

5. REMOTE CONTROL
8
5.2 Control Example
As an example, the procedure for comparing image data is described below.
● Preparation
Save the reference image data in the LT 6280A.
Send >RID Retrieves the reference image.
Response RID 0 1280 720 8 Successful retrieval.
The retrieved image is 1280 × 720, 8 bits.
Send >SIF test.bmp Assigns a name to the reference image and saves it.
Response SIF test.bmp 1280 720 8 Successful save operation.
● Comparison
Using the image data saved in “Preparation” as a reference, compare images.
Send >RID Retrieves the image to compare.
Response RID 0 1280 720 8 Successful retrieval.
The retrieved image is 1280 × 720, 8 bits.
Send >LIF test.bmp Loads the reference image that has been saved in the LT
6280A.
Response LIF test.bmp 1280 720 8 Successful loading.
Send >CMP Compares the “RID” and “LIF” images.
Response CMP 0 0 The two images are the same (the number of mismatched
bytes is zero).