Leader LT 4600A, Instruction Manual, Page: 49 / 114

8. CONFIGURING THE SYSTEM (SYSTEM SETTING)
39
8. CONFIGURING THE SYSTEM (SYSTEM SETTING)
SYSTEM SETTING is used to configure the LT 4600A operation.
Note that if you change the system settings, the settings specified using BLACK SETTING and
SDI SETTING are reset to their factory defaults.
8.1 Selecting the Frequency Group
To select the black-output and SDI-output frequency group, follow the procedure below.
When you change the frequency group, the settings specified using SDI OUTPUT SELECT
are reset to their factory defaults.
１．ＳＹＳＴＥＭ ＳＥＬＥＣＴ

＊５９．９４Ｈｚ ＧＲＯＵＰ
ＣＨＡＮＧＥ ＳＹＳＴＥＭ ？
■ＯＫ □ＣＡＮＣＥＬ

Procedure
SYSTEM SETTING
→ SYSTEM SELECT: 60.00Hz GROUP / 59.94Hz GROUP / 50.00Hz
GROUP
Settings
60.00Hz GROUP:
1080 or 720 images whose frame (field) frequency format is 60, 30, or
24 can be output.
59.94Hz GROUP: 1080 or 720 images whose frame (field) frequency format is 59.94,
29.97, or 23.98 can be output.
50.00Hz GROUP: 1080 or 720 images whose frame (field) frequency format is 50 or 25
can be output.
8.2 Selecting the SDI Output Mode
To select the SDI output mode, follow the procedure below.
２．ＭＯＤＥ ＳＥＬＥＣＴ

＊ＳＤＩ １ ／ ２
ＣＨＡＮＧＥ ＭＯＤＥ ？
■ＯＫ □ＣＡＮＣＥＬ

Procedure
SYSTEM SETTING
→ SDI OUTPUT SELECT → MODE SELECT: SDI 1 / 2 / 3G-LvB / DUAL
Settings
SDI 1 / 2:
3G-A, HD, or SD is output. SDI OUT 1 and 2 can be set separately.
3G-LvB / DUAL: 3G-B or HD (DL) is output. When set to 3G-B, the same signal is output
from SDI OUT 1 and 2.