13. Audio Display
13-9
13.6.3
Selecting the Headphone Jack Output Channels
To select the left and right headphone jack output channels separately, follow the
procedure below. You can select the two headphone channels from the channels that are
assigned to 1st GROUP and 2nd GROUP.
Reference: 1st GROUP and 2nd GROUP
→
Section 13.3, “Selecting Which Channels to Measure”
Procedure
MULTI
→
F•4 MULTI AUDIO
→
F•5 PHONES
→
F•3 L CH SELECT
→
F•4 R CH SELECT
Settings
Selectable range: The channels assigned to 1st GROUP and the channels assigned to
2nd GROUP.
The default setting is CH1 for L and CH2 for R.
