Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: [email protected]
USER´S MANUAL
LDPHA1
SAFETY INFORMATION
1.
Please read these instructions carefully.
2.
Keep all information and instructions in a safe place.
3.
Follow the instructions.
4.
Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5.
Use the equipment only in the intended manner and for the intended purpose.
6.
Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain
that wall mounts are properly installed and secured. Make certain that the equipment is installed
securely and cannot fall down.
7.
During installation, observe the applicable safety regulations for your country.
8.
Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat.
Make certain that the equipment is always installed so that is cooled sufficiently and cannot overheat.
9.
Never place sources of ignition, e.g., burning candles, on the equipment.
10.
Ventilation slits must not be blocked.
11.
Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor
equipment - in this case, observe the special instructions noted below. Do not expose this equipment
to flammable materials, fluids or gases.
12.
Make certain that dripping or splashed water cannot enter the equipment. Do not place containers
filled with liquids, such as vases or drinking vessels, on the equipment.
13.
Make certain that objects cannot fall into the device.
14.
Use this equipment only with the accessories recommended and intended by the manufacturer.
15.
Do not open or modify this equipment.
16.
After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due
to tripping hazards.
17.
During transport, make certain that the equipment cannot fall down and possibly cause property
damage and personal injuries.
18.
If your equipment is no longer functioning properly, if fluids or objects have gotten inside the
equipment or if it has been damaged in another way, switch it off immediately and unplug it from the
mains outlet (if it is a powered device). This equipment may only be repaired by authorized, qualified
personnel.
19.
Clean the equipment using a dry cloth.
20.
Comply with all applicable disposal laws in your country. During disposal of packaging, please
separate plastic and paper/cardboard.
21.
Plastic bags must be kept out of reach of children.
22.
CAUTION: If the power cord of the device is equipped with an earthing contact, then it must be con-
nected to an outlet with a protective ground. Never deactivate the protective ground of a power cord.
23.
If the equipment has been exposed to strong fluctuations in temperature (for example, after transport),
do not switch it on immediately. Moisture and condensation could damage the equipment. Do not
switch on the equipment until it has reached room temperature.
24.
Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency
match the values specified on the equipment. If the equipment has a voltage selection switch,
connect the equipment to the power outlet only if the equipment values and the mains power values
match. If the included power cord or power adapter does not fit in your wall outlet, contact your
electrician.
25.
Do not step on the power cord. Make certain that the power cable does not become kinked, especially
at the mains outlet and/or power adapter and the equipment connector.
26.
When connecting the equipment, make certain that the power cord or power adapter is always freely
accessible. Always disconnect the equipment from the power supply if the equipment is not in use or
if you want to clean the equipment. Always unplug the power cord and power adapter from the power
outlet at the plug or adapter and not by pulling on the cord. Never touch the power cord and power
adapter with wet hands.
27.
Whenever possible, avoid switching the equipment on and off in quick succession because otherwise
this can shorten the useful life of the equipment.
28.
IMPORTANT INFORMATION: Replace fuses only with fuses of the same type and rating. If a fuse blows
repeatedly, please contact an authorised service centre.
29.
To disconnect the equipment from the power mains completely, unplug the power cord or power
adapter from the power outlet.
30.
If your device is equipped with a Volex power connector, the mating Volex equipment connector must
be unlocked before it can be removed. However, this also means that the equipment can slide and fall
down if the power cable is pulled, which can lead to personal injuries and/or other damage. For this
reason, always be careful when laying cables.
31.
Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike
or before extended periods of disuse.
CAUTION:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Never remove the cover, because otherwise there may be a risk of electric shock. There are no user service-
able parts inside. Have repairs carried out only by qualified service personnel.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user
to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electrical shock.
The exclamation mark within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance instructions.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://www.adamhall.com/media/shop/
downloads/documents/manufacturersdeclarations.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Daimler Straße 9, 61267 Neu Anspach
/ Email [email protected] / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not be
treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and have it recycled to promote sustainable
economic activity.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details on where and how they can recycle this item in an environmentally friendly manner.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal
OPERATION
48 V phantom power for supplying power to high quality condenser microphones for the studio and stage.
1
SWITCH 115V / 230V
Switch for setting the operating voltage. The mains voltage of your power supplier and the operating voltage of the
device must be the same!
2
IEC POWER SOCKET WITH INTEGRAL FUSE HOLDER
An appropriate mains cord is included in the package.
IMPORTANT INFORMATION: BEFORE using this equipment, make certain that the mains voltage of your energy
utility and the operating voltage of the device match! Always replace the fuse with a fuse of the same type
and rating according to the supply voltage!
If the fuse blows repeatedly, please contact an authorised service centre.
3
POWER ON / OFF
Illuminated On / Off switch for the power supply of the device.
4
MIC IN
Microphone input with 3-pin XLR plug.
5
OUTPUT
Signal output with 3-pin XLR jack to route the microphone signal.
6
POWER LED
Lights up once the system is properly connected to the power mains and switched on.
3
5
6
2
1
4
