Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: [email protected]
A
F
A
F
D
C
E
B
A
F
A
F
E
B
USER´S MANUAL LDEBG3WMB
Swivel wall & ceiling mount for Stinger® G3
SAFTY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Be attentive when mounting the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate
plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: https://cdn-shop.adamhall.com/media/
pdf/Manufacturers-Declarations-LDSYSTEMS_DE_EN_ES_FR.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Daimler Straße 9, 61267 Neu Anspach
/ Email [email protected] / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not be
treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and have it recycled to promote sustainable
economic activity.
LDEBG3WMB
(SUITABLE FOR LDEB122G3, LDEB122AG3, LDEB152G3, LDEB152AG3)
Screw the adjustable U-bracket (in a suitable position) to a load-bearing wall or ceiling (A). Use suitable screws and plugs
etc. to ensure secure mounting. The 35mm mounting stud can be installed on the bracket at four different distances from
the wall (or ceiling). Select the appropriate position for the speaker and screw it tightly to the bracket (B, position the supplied
rubber ring on the mounting stud). Remove the M10 screw on the top of the loudspeaker and lift the speaker into the bracket
so that the 35mm mounting stud sits in the 0° flange of the speaker (C).
Now set the adjustable side of the bracket to the appropriate size for the speaker and secure it with the two screws on the
side of the bracket (D). Using the supplied M10 T-screw in the correct position directly opposite the mounting stud, position
the speaker at the desired angle in the bracket (E, place supplied rubber washer between bracket and speaker. For perma-
nent installation an M10 Allen screw is supplied). For traverse-installation, mounting holes for traverse clamps are situated
at positions corresponding to speaker size (F).
SPECIFICATIONS
EN
For further instructions, please check out the detailed online manual in the download area of this product at:: www.ld-systems.com
Model name:
LDEBG3WMB
Type:
PA Loudspeaker Accessories
Part:
Wall/Ceiling/Truss Mount Bracket
Suitable for:
LDEB122G3, LDEB122AG3
LDEB152G3, LDEB152AG3
Material:
Steel
Surface:
Powder Coated
Colour:
Black
Max. Load
28 kg
Dimensions (W x H x D):
550mm x 90mm x 308mm
Weight:
3.5 kg
