2
1. Warnings and safety instructions
This section describes precautions that should be observed in order
to prevent injury to the user and damage to property, and to ensure
safe use of the product. Be sure to observe the following points when
using the product to avoid malfunction.
Warning
If you want to use the SATA hard drive, you must
remove
the IDE
cable at first
●
The product may generate heat when used for a long period of
time.
●
Do not attempt to disassemble this product.
●
Do not use this product if it is wet or exposed to the chemicals,
oil or any
liquids.
Caution
●
Do not handle, shake or try to
move
this product while the hard
drive is writing and reading data.
●
Do not bend, apply excessive pressure to or place heavy objects
on this product.
●
Do not expose this product to the following conditions;
●
Heavy vibration or shock
●
Direct sunshine
●
Dusty, hot and/or humid conditions
●
Extreme temperature fluctuations
●
Near magnetic fields
If this product is disconnected suddenly during file transfer, it may
cause data loss and an error. If this happens, attach the product to
your PC and run the Windows Scan Disk utilities.
If bad sectors are generated in the hard drive due to physical impact
or other causes, the product may not work properly. Please use the
Scan Disk program of the Windows operating system to fix the error.
Operation hints
Regular backup is recommended to preserve and store your data.
We are not responsible for data deletion, damage, or any
consequences caused by improper handling or data storage.
Limited liability
