Installation and maintenance manual lba12
4
1
Introduction
:
1.1
Safety
:
Thank you for choosing La Barrière Automatique to secure and regulate access to your
site(s). You can be sure that you will be satisfied with your purchase for many years to
come.
Nevertheless, before installing your equipment, we recommend that you read the
attached instructions for installation and use.
We have tried to use clear and simple language in our explanations: but if there is
anything you still don't understand, please get in touch with us for any additional
information or comments.
Read these instructions carefully before installing or repairing the automatic rising
barrier.
The installation and maintenance of the rising barrier must be carried out by a
professional installer in accordance with the instructions and current regulations.
All the instructions must be followed to avoid any injury. Not following these instructions
can cause injuries that, in certain cases, can be serious.
If you do not follow the provisions listed below, La Barrière Automatique shall not be
liable for any injury or damage to people or possessions:
► In case of malfunction, immediately turn off the electricity supply to the motor
and operate the barrier manually until the cause of the problem has been
determined and resolved;
► Do not carry out modifications to any part of the product unless this is described
in the manual;
► Modifications or disassembly must only be carried out by qualified and
authorised personnel;
► Do not carry out modifications to any part of the product unless this is described
in the manual;
► Avoid placing the parts of the mechanism close to sources of heat or in contact
with liquid substances;
► Use appropriate electrical cables
► For the best operation of the mechanism, use the accessories recommended
by La Barrière Automatique;
► The installation, checking and operation must be carried out according to
current regulations;
► Eliminate waste materials according to local regulations.
