11
Network Commands for Remote Control of the DSPs
Channel Specific Commands
action
command
Mute
Mute
In 1
c1
i0m2n2v1e <cr lf>
Gain
Kanal Out 1
auf
5,00 dB
c128
i0m1n1
v500
e <cr lf>
Change gain of one channel several times (the command
needs not to be repeated completely)
only change value
c128
i0m1n1
v500
e <cr lf>
send again
(z. B. 8 dB)
v800
e <cr lf>
The same value can be taken for several channels
(e. g. for
c131
i0m1n1
v500
e <cr lf>)
change the selected channel
c0
<cr lf>
take values
e <cr lf>
Non Channel Specific Commands
Change preset
select preset number
1
c0i0m4n4
v1
e <cr lf>
activate selected preset
c0i1m3n3v0e <cr lf>
Examples
Channels
Structure of the Commands
Procedure:
Open the DSC Control Software and connect with the device. Open tab „Hardware“ > „Configure“ > „Network Settings“ and activate
the Telnet Interface. A fixed IP address can be assigned as well. The device is accessed via its IP address on TCP Port 23 (Telnet).
Input
command
In 1
c0
In 2
c1
Ouput
command
Out 1
c128
Out 2
c129
channel number
c*
function
value v
Execute
Channel Specific Commands
[c0] - [c7] &
c1
Gain
i0m1n1
[-9999 bis 1200]
v-9999
e <cr lf>
[c128] - [c135]
c1
Mute
i0m1n1
[v1=Mute v0= Unmute ]
v0
e <cr lf>
General Commands
[Always c0]
c0
Select preset
i0m4n4
[Number of Preset]
v1
e <cr lf>
[Always c0]
c0
Load preset
i1m3n3
[Always 0]
v0
e <cr lf>
[Always c0]
c0
Enter stand by
i4m3n3
[Always 0]
v0
e <cr lf>
[Always c0]
c0
Exit stand by
i5m3n3
[Always 0]
v0
e <cr lf>
[Always c0]
c0
Wink
i6m3n3
[Always 0]
v0
e <cr lf>
* Address channels with their index (see list).
Always send commands with CR LF.
Further Commands
H, X & L: example and commands
Q quits the connection
