221-J
Operating Instructions
For
LaZee Mouse
™
Pro
Thank You for purchasing the LaZee Mouse
™
Pro!
We hope you enjoy your purchase. We at LaZee
Tek strive to build quality products, and want you to
to be completely satisfied.
System Requirements
Hardware:
Available powered USB port
Software: -
Microsoft Windows™
XP, Vista, 7, 8, 8RT & 10
-
OSX™ 8.0 or above
-
Unix™ / Linux any w/ HID drivers
Setup Instructions
1.
Begin with unpacking the LaZee Mouse™
package. Inside you should find:
a.
LaZee Mouse™ Pro
b.
Headset with Microphone
c.
USB Cable
d.
USB Extension Cable
e.
Standard Mounting Kit
f.
Operating & Mounting Instructions
2.
Connecting the two cables to the LaZee
Mouse™ Pro consists of:
a.
Insert the microphone plug into the
3.5mm input jack on the LaZee
Mouse™ Pro. LaZee Tek products use
standard 1/8” jacks. If your mic has a
different size plug, standard adapters are
readily available from numerous
electronic and office stores.
b.
Insert the small end of the USB cable
into the LaZee Mouse™ USB port.
3.
For new users, It’s recommended to reduce
the mouse speed settings, to a maximum
cursor travel speed of 5 sec from Left to
Right side of display. New users should
reduce the mouse speed settings of the
computer. While reducing the mouse speed
settings is recommended, it is not a
requirement. After the user has be-come
“familiar” with operating the LaZee
Mouse™ at the slower speed settings, they
can be gradually increased. The menu for
adjusting the mouse speed can be found at:
It is also advisable to reduce the double-
click speed. The menu for reducing the
double-click speed can be found at:
4.
With the LaZee Mouse™ resting
undisturbed on a table, plug other end of
USB cable into the computer’s USB port.
(It is OK to plug this in while the computer
is powered ON)
5.
The first time LaZee Mouse™ is connected
to a computer system, Windows will detect
new hardware & recognize LaZee Mouse™
as a “Human Interface Device”. After next
windows menu shows “New hardware is
ready for use”, proceed to step 6.
