V_pro8 Manual
V1.0/2
85
Operation (Web Browser Control)
SDI Out
SDI Out -> Ch.ID & Pattern
This sub menu can be used to insert a channel ID and timecode into the video channel, and test tone
into all 16 audio channels.
To insert an output ID:
1.
Select either of the
Output ID
buttons (blue = on; grey = off). Only one button may be
selected at a time:
ID
- inserts text, as entered in the
Output ID Name
field.
Src: Input x
- inserts the channel ID embedded in the source's video channel (in our example,
from SDI Input 3).
The insert appears on the video preview; its position is shown in the
ID Position
fields.
2.
If
ID
is selected, click on the
Output ID Name
button to open an on-screen keyboard and
enter a new text string. You can display up to 16 characters (or 8 characters plus timecode, if the
Timecode
insert is enabled).
3.
Click and drag on the insert box, in the video preview, to adjust the ID's position. Or, click on
the
X Pos
and
Y Pos
buttons to enter a numerical value.
To insert timecode:
1.
Select the
Timecode
button (blue = on; grey = off). Note that you will see the timecode value
inside the button if timecode is present.
The timecode appears in the insert box, after the output ID if both are enabled.
To enable Audio Test Tone
1.
Select either of the
Audio Tone
buttons (blue = on; grey = off). Only one button may be
selected at a time:
1kHz (-18dB)
- routes a 1 kHz sine wave to all 16 embedded audio channels.
400Hz (-18dB)
- routes a 400 Hz sine wave to all 16 embedded audio channels.