V1.0/2
66
V_pro8 Manual
Operation (Web Browser Control)
Status
Status -> MADI
1.
Select
Status -> MADI
, and then select
MADI Status
from the sub menus:
The fields provide information about each port,
MADI 1
&
2
for
Front
and
Rear
panel connections:
Input Status
- whether the MADI input data is locked.
Link Mode
- in a future software release, this field will select which MADI input is active (front
or rear) to configure redundant connections. In Version 1.0, the first recognised and locked
MADI input is used.
MADI Mode
- the number of channels per link, 64 or 56.
SFP Module
- the SFP adaptor type.
2.
Click on the
SFP Module
name to open a pop-up with further information (shown above).
3.
To interrogate the status of the MADI audio channels, select either
MADI 1 I/O
or
MADI 2 I/O
from the sub menus:
If signal is present on a MADI input or output, then a green circle appears - in our example, audio is
present on MADI port 2, Outputs 1&2 and 17&18.
