ruby standard configuration User Manual
Version: 6.4.0/2
24/179
6. Installation
6.2
Installing Power Core
6.2.1
Unpacking
Power Core is delivered in its own box with all accessories. If you have ordered IO cards for the rear expansion
slots, SFP modules or a 12V DC power supply, then these will be packaged separately (in the same box).
Please check the contents of the shipping boxes, and in the event of any transport damage, contact your local
Lawo representative or email
. A list of serial numbers for all components is included with the
shipment. Please keep this list for your records.
6.2.2
Packing List
Included
Power Core ships with the following accessories:
·
1 x 2m IEC power cable (country-specific) - to connect AC mains to the frame.
·
1 x USB license dongle (250-5998-000).
·
1 x serial cable (485-0700-000) - to connect to the RS 422 port (for diagnostics).
·
Dust caps for the Network Interface and MADI SFP cages - these will be mounted in the frame.
·
1 x USB memory card - containing marketing materials.
Note that the Power Core license code (for the USB dongle) and DisplayDock license code can be found on
the delivery note.
Optional
The following items must be ordered separately:
·
1 x external 12V DC power supply (955/50-80) with 2m IEC power cable (country-specific) - to connect
12V DC power to the frame.
·
1 x USB license dongle safety cap.
·
SFP modules - for the network interface and MADI ports.
6.2.3
Mounting the Frame
Front View
Rear View
Recessed Rack
Adapters
Power Core is designed to be mounted in a 19-inch rack. Please install supporting slide bars to hold the weight
of the unit, and use the locking devices provided. For recessed rack-mounting, use standard, third-party, 1RU
recessed rack adapters such as the ones shown above. When fitting the rack adapters and slide bars, you
must make sure that there is sufficient airflow around the device for cooling.
Connectors are located at the front and rear of the unit. Therefore, when using 19-inch racks with doors please
leave enough room for the cables.
If you have IO cards to install, then these should be fitted
BEFORE
installing the unit into the rack.
