LAWO Ruby standard configuration, User Manual

Page: 141 / 179

ruby standard configuration User Manual Version: 6.4.0/2 141/179
9. The Web UI
Retuning Streams
If changes are made to the network infrastructure after the initial tuning process, then the Jitter Class, Path
Delay Class and Time Offset values may no longer be correct. In this instance, audio from the RAVENNA
streams may be degraded or inaudible, and you should manually retune the streams as follows:
·
Retune - select this button to individually retune a stream.
·
Retune All - select this button to retune all streams.
·
Set Time Offset - this button allows manual entry of a Time Offset for a single selected stream. This is
an advanced function which should only be used when instructed by Lawo Support personnel. Values
entered using this button are cleared after every reboot.
The retuning process goes through three phases which are displayed on-screen. If audio on a selected stream
was not previously present, it should be restored immediately. Once 8 has been reached, retuning is complete
and the stream’s new
Time Offset value is shown in the Stream Destinations List.
If Power Core is NOT set to slave only in the PTP Engine , streams are retuned on every reconnect.