ruby standard configuration User Manual
Version: 6.4.0/2
126/179
9. The Web UI
Admininstrator Mode
In
Administrator
mode, you can access all of the Supervisor options plus the following.
Ø
Control Functions
By default, the “Enable FTP” box is checked to allow file transfers to Power Core via FTP. Uncheck this option
to prevent FTP access.
The "Telnet Ports" and "WebUI Ports" are added to the list of network communication protocols. This allows you
to restrict Telnet and Web UI access to only the CONTROL A port (
dwc0
) if necessary.
Ø
Edit Access Passwords
This area can be used to edit the passwords for the Supervisor and Administrator modes in the Web UI, and/or
the device's Telnet login.
In each case, enter the current password into the "Recent Password" field, followed by the new password into
the two "New Password" fields. The new password must meet the following requirements: minimum of 5
characters, maximum of 16 characters, character range: ASCII 32..127. Click on
Submit
to apply the changes
- an on-screen message appears to confirm (or deny) the operation.
