LAWO mc256 MKII, Technical Manual

Page: 172 / 372

mc²56 MKII Technical Manual V5.10.2/1 172
Chapter 3: AdminHD
Signal List Configuration
Opening a Saved Signal List
To open an existing signallist.slx file:
1. Click on ( Open signal list config ) from the 'Signal List Editor' toolbar . (If you have made changes to
the current Signal List, then you will be asked if you wish to Save the changes first).
2. Select your file and click Open :
The file opens, and the path and file name appear at the top of the 'Signal List Editor' window:
If there is a problem opening the file, then check:
·
Is the file an AdminHD .slx ?
·
Was the file saved by a newer release of AdminHD?
Configurations saved by an earlier version of AdminHD can be opened in a later release. However,
configurations saved by a newer release are not backwards compatible.
·
Does the file contain signals which are not supported by the current Core configuration? If so, then some
parts of the Signal List will not load.