LAWO mc256 MKII, Technical Manual

Page: 138 / 372

mc²56 MKII Technical Manual V5.10.2/1 138
Chapter 3: AdminHD
Core Configuration: Defining the System
Defining the I/O Ports
Each I/O module can now be opened within the ‘ Core Browser ’ to view its ports.
In the case of an AES3 module, the port is predefined and can be opened to access the AES input and output
signals.
In the case of a MADI, RAVENNA or DANTE module, the ports require further configuration. For example, a MADI
port can connect to a
DALLIS , operate as Tie-Line s to/from an external device, connect to the Lawo Plugin
Server , etc.
1. Select the Port in the ‘ Core Browser ’ and right-click:
The drop-down options vary depending on the module type (MADI, RAVENNA or DANTE) and the AdminHD mode
and software release. They are covered in more detail on the next page.
2. Select an option - for example, a DALLIS . The selection is added to the 'Core Browser':
If you want to change the function of a port, then you will need to delete the current assignment - for example,
right-click on a
DALLIS in the 'Core Browser' and select Delete :
You are asked to confirm - select Yes to remove the assignment, and all of its sub components, from the
configuration. You can now return to step 1 to make a new selection.