crystal User Manual
Version: 6.6.0/2
388/459
20. Networking Options
Client - Source Configuration
The final step is to add and configure the sources within each client configuration. This is done by opening the
Source element you wish to configure:
1.
Assign the
Audio Input
which will receive the incoming microphone signal – in our example, via the
MADI link from the server.
2.
In the
Matrix Mic Nr
box, enter the
you defined earlier within the server's
configuration – in our example,
101
.
If a
Mic Arb Offset
was entered within the server's
configuration, then the offset is applied
here.
3.
In the
Matrix Gnet Port
box, enter the GPI/O Network port number which connects to the
Nova17
– in
our example, port
1
.
4.
Repeat these steps for the second client, this time entering
102
for the
Matrix Mic Nr
, and port
2
for
the
Matrix Gnet Port
.
5.
Save and download all of the server and client configurations.
You can now switch control of the microphone settings between clients by triggering the corresponding control
signals - i.e. the
Condition
signals for
Mic Input Nr x
(defined in the servier's