crystal User Manual
Version: 6.6.0/2
348/459
19. Configuring Custom Logical Behaviour
19.8
DEL
"Logic -> DEL"
A
DELAY
element can be used to delay a control signal. For example, to issue a record signal following by a
delayed Play or Pause command to an external recording device (to commence recording).
General Parameters
DEL
Reference name for the element.
In
Assigns the control signal you wish to delay.
Delay TIme (1/30 sec)
Enter the delay time in degrees of 1/30 second. Note that this time is approximate.
The control outputs appear under the “Logic -> <GroupName> -> DEL”:
Out
The delayed output.
