crystal User Manual
Version: 6.6.0/2
345/459
19. Configuring Custom Logical Behaviour
19.5
Blink
"Logic -> Blink"
A
Blink
element converts a static signal such as a GPI into a dynamic toggling signal (on/off/on/etc). For
example, to create a blinking MF Key to signal an incoming telephone call.
The
Blink
element uses a lot of resources and may slow down the real time operation of the system.
General Parameters
Blink
Reference name for the element.
Data
This control signal switches on the blink function.
On time (1/10 sec)
Enter the duration of the on time.
Off time (1/10 sec)
Enter the duration of the off time.
The control outputs appear under the “Logic -> <GroupName> -> BLINK” branch of the 'Tree Selection'
window:
Out
The BLINK output.
nOut
Negated BLINK.
