crystal User Manual
Version: 6.6.0/2
283/459
15. Configuring the Snapshots System
15.2
Global Snapshot Options
"System -> Definition -> Parameter = Snapshots"
This branch of the 'Tree Definition' configures the global options for snapshots. The same parameters are
repeated four times in a Power Core Max system (to allow a different configuration for each Access Group).
Select "
System
->
Definition
" in 'Tree Definition' and the
AccessGrp
tab. Scroll down to access the
"
Parameter
=
Snapshots
" options:
Parameter
Snapshots – reference name for the element.
Load max. Fader No.
Enter the maximum fader number which will be reset by a snapshot load. Any fader above this
number will not be affected. Leave the field blank to apply snapshot loads to all faders.
This option applies to both the internal snapshot memories and VisTool snapshots.
Load Audio always
If ticked, audio-related parameters are loaded for all faders regardless of the
Load max. Fader No
.
You can use this option to load audio-related parameters to all faders, while loading fader strip
assignments up to the
Load max. Fader No
.
Audio-related parameters include User Labels, DSP Settings, Fader level (if
enabled) and Bus assignments.
This option applies to both the internal snapshot memories and VisTool snapshots.
Enable Load Groups
Logic
Available when the System Core =
Power Core
.
If ticked, a number of additional logic inputs become available -
FC: Disable..
. and
FO: Enable...
The inputs can be used to change which source parameters load depending on the fader status.
See
Selective Loading of Source Parameters
If unticked, the default behaviour applies: all parameters load if source faders are closed, and do not
load if source faders are open.
This option applies to both the internal snapshot memories and VisTool snapshots.
Load Snapshot 1 to 5
Assigns input control signals which will load internal snapshot memories 1 to 5 when supplied with
a rising edge.
For example, you may wish to program an MF Key which will ‘zero’ the desk from the press of a
button.
Save Snapshot 1 to 5
Assigns input control signals which will save internal snapshot memories 1 to 5 when supplied with
a rising edge.
Load Src Clipboard
When activated, this control signal loads DSP parameters in the internal clipboard to the source “in
access”.
Save Src Clipboard
When activated, this control signal saves DSP parameters from the source “in access” to the
internal clipboard.
Delete Src Clipboard
When activated, this control signal clears the internal clipboard.
