crystal User Manual
Version: 6.6.0/2
282/459
15. Configuring the Snapshots System
15.1
Isolating Fader Strips
Open the "Surface -> Fader Module" branch of the 'Tree Definition', and select the
Snapshots
tab to isolate
fader strips from snapshot loads. For example, if there is more than one operator, you may wish to use
snapshots to reset some faders and not others.
When the
SnapLoad disable (Default Map)
option is active, all Source, Sum and Assign parameters remain
unchanged if a snapshot is loaded.
·
Use
Ch
1.1
to
1.4
to isolate Layer 1, strips 1 to 4.
·
Use
Ch
2.1
to
2.4
to isolate Layer 2, strips 1 to 4.
The Default Map positions determine which channels are isolated.
This option applies to all types of snapshot: internal memories and Vistool full/source snapshots. It has no affect
when snapshots are saved. Generally, all channels are included when saving.
