crystal User Manual
Version: 6.6.0/2
238/459
13. Intercom
13.3.3
Defining the Intercom Global Parameters
Select each
Intercom
element to define its
Global
parameters.
Intercom Local
Intercom
Enter a unique reference name.
Identifier
Enter a unique reference number. This number is used to identify the element within the
InterCom software, see
The nova29 support an Identifier range up to 96. The Identifier range for sapphire and crystal
is limited to 48; these systems will ignore numbers higher than 48.
LED Time (1/10sec)
Enter the timeout for the signalisation of an incoming call. The button lamp/LED will stop
blinking after this time.
Audio Input
Assign the audio input to be used as the talkback source. For our example, this should be the
talkback mic named
Group In Signal
Select this checkbox to enable group key blinking. When enabled, and the group is active, all
group keys to which the caller is assigned blink.
