crystal User Manual
Version: 6.6.0/2
203/459
10. Audio Mix Engine
10.6.7
Level Control (from a Fader)
The special source type (Source -> Minimix) creates a fader-controlled gain element which can be assigned to
any level control. This allows you to control any level, such as the output of a
, from a fader. Using a
VisTool Fader element, level can also be adjusted from an on-screen fader.
1.
Insert a new
Source
in the usual manner, see
2.
Set the source
Type
to
Minimix
.
3.
Name and edit the source parameters.
These are a subset of the
described earlier. Most important is the Reference name which
must be unique - in our example,
HP Level
:
The
Fader Level Sync
input can be used to set the gain from an external controller. Note that this is a one-
way gain sync only, and so any changes made by the fader will not be sent back to the external controller.
4.
Now locate the element you wish to control from the source - in our example, a Minimixer. And, assign
the source's
Fader Level Out
control to the desired parameter field (
Level
):
5.
Once the configuration is saved and transferred, assign the source named
HP Level
to a fader strip.
You can now remotely control the Minimixer level from its fader.
