LAWO crystal, User Manual, Page: 105 / 459

crystal User Manual Version: 6.6.0/2 105/459
7. Operation
7.16.3 Using the Local Snapshot Memories
The five local snapshot memories always reset the console globally. They are stored, recalled and cleared as
follows.
The configuration can define an UNLOCK function to protect the local snapshots from being saved or
deleted by accident. If this is the case, then you will need to activate
UNLOCK (usually an MF Key) before
you can perform an operation. (Use Snap Unlock , in the " System -> Definition -> Parameter =
Snapshots " branch of the 'Tree Definition', to activate this option.
In addition, your user rights may prevent you from saving or deleting the 5 local snapshot memories.
Ø
To store settings in a local memory:
1
.
Press and hold UNLOCK followed by SNAP STORE .
If a memory has been used, then the numbered buttons, 1 to 5 , illuminate in red. A green button indicates a
free memory. If you select a used memory, then its contents will be overwritten.
2
.
Keep holding SNAP STORE and select a memory - e.g. number 4 .
The SNAP STORE button flashes magenta to indicate a successful operation.
Ø
To recall settings from a local memory:
1
.
Press and hold UNLOCK followed by SNAP RECALL .
You can see which memories contain data by looking at the lit buttons - in our example, there is data stored in
memories
1 , 2, 4 and 5 .
2 . Keep holding SNAP RECALL and select a memory - e.g. number 4 .
The SNAP RECALL button flashes magenta to indicate a successful operation and the console resets.