LawnMaster Eco Series, Manual, Page: 8 / 22

7
Oil:
1. Place the Edger on a level surface.
2. Remove the oil dipstick.
3. Wipe the dipstick clean.
4. Fill to the full mark indicated, pouring slowly –
DO NOT OVERFILL.
5. Check the level by inserting
the dipstick back into the
engine without tightening.
6. Once full, screw the dipstick
securely back into place.
Note that if the engine is overfilled,
it will smoke excessively or appear
to be seized.
Caution
Engines are shipped without oil. Check the
engine manufacturers’ manual for oil grade
and quantity details.
Figure 1 Oil Dipstick