Lawn-Boy Insight 34001, Operator'S Manual

Page: 5 / 20

114-3794
1. Hot surface (on exhaust baffle)
Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1.
No parts required
–
Unfold the handle.
Discharge chute 1
Bolt 3
Locknut 3
Spacer 2
2.
Washer 1
Install the discharge chute.
3.
No parts required
–
Adjust the handle height.
1. Unfolding the Handle
Procedure
1. Remove the end caps from the bottom ends of the
handle (Figure 3).
Figure 3
1. End caps 3. Lower handle knob (2)
2. Handle bolt (2)
2. Loosen the lower handle knobs and pull out the
handle bolts until you can move the handle freely
(Figure 3).
3. Rotate the handle to the operating position
(Figure 4).
Figure 4
4. Install the handle bolts and tighten the handle knobs
until they are snug.
5